2/90 Modular: The System and Component Design Options

Detailed Configuration Options

End Caps and Trim Options

Top Trim, Accent Strip, and Bottom Trim

Six end cap styles are offered in any standard or color match paint finish, natural anodized aluminum and wood finish. Top and Bottom Trim and Accent Strip options can be used to further stylize signs.

Bullnose, Rounded Corner, and Angleback End Caps
Square Corner, Slimline, and Stepback End Caps

Mounting Options

	A PRESSURE SENSITIVE – Pressure-sensitive mounting intended for smooth, hard surfaces. Not recommended for selected vinyl wall coverings. Can be used with Silastic® bonding. 100 square inches maximum.
	B MAGNETIC – Same as “A” but uses magnetic mounting for steel surfaces. 100 square inches maximum.
	C VELCRO – Same as “A” but uses Velcro® for fabric surfaces. 100 square inches maximum.
	D SCREW-ON – Screw-on mounting for rough surfaces such as brick and drywall, where “A” is not recommended. Recommended on all wall-mounted signs larger than 100 square inches.
	E PIN – A specifically designed pin device for fabric surfaces. Unique one-piece design enables mounting to any fabric surface, including fabrics mounted over hard materials. 100 square inches maximum.
	F HOOK – Hook device in clear plastic that “hooks over” top of panel. Automatically locates sign 2" from top of panel. Order must specify panel make and thickness.
	G FREESTANDING – For freestanding applications such as receptionist name signs. Extruded aluminum bracket. Maximum sign height of 4" for standard and 2" for Thin is recommended. 2/90 Thin stand sits at 30° angle.
	H PANEL TOP – For mounting on top surface of panel. Extruded aluminum bracket with pressure-sensitive tape. Maximum sign height of 8" is recommended.
	*I CEILING MOUNT (SUSPENDED CEILING) – Connects to grid system using extruded aluminum 2" brackets. Signs appear to be “floating” below ceiling line. Specify 1/2" or 1" grid system.
	*J CEILING MOUNT (HANGING) – General-purpose hanging applications for high or irregular ceilings. Hang lines tie to various points (rafters, beams, duct work, piping, etc.). Customer must supply hanging line material.
	*K PERPENDICULAR WALL MOUNT – Mounts sign at 90° angle to wall surface. Not available on signs wider than 15".
	*L INSIDE OF GLASS MOUNT – Clear acrylic bracket attached to glass with clear pressure-sensitive tape.
	*M CEILING MOUNT (HANGING) – Extruded aluminum bracket, screw mount. No mounting screws provided with this mount.
	*N CEILING MOUNT (RIGID POST) – Sign mounts 6", 12", 18" or 24" from ceiling using 1/2" black aluminum rod.
	O FLEXIBLE PANEL MOUNT – Under the top cap panel device in black or white fabric. Automatically locates the sign flush with the top of the panel. Order must specify fabric color.
	P PANEL AND TILE MOUNT – Hook device in aluminum that hooks over the top of panel, under the top cap. Automatically locates sign flush with the top of the panel. Order must specify panel make and thickness.